Skip to content

FPV community · Build notebook

A build is useful when someone else can reproduce it

This notebook starts with Drone Authority reference builds. Community records publish only when they name exact hardware, software, wiring, test evidence, and known substitutions.

FPV aircraft and components documented on a clean workbenchREVISION · EVIDENCE · CHANGELOG

Reference shelf

Documented by Drone Authority

These are not presented as reader submissions. They are the publication standard that future community builds must meet.

Open Build Lab

Drone Authority reference

DA-5A-R1

Analog field build

Repairable freestyle and field practice

The least expensive video path on one common 6S airframe. Every signal remains visible on the board, which makes it the clearest build for learning wiring and diagnosis.

Video
Analog 5.8 GHz
Control
ExpressLRS 2.4 GHz / CRSF
Power
6S / XT60
BOM
8 exact component lines

Drone Authority reference

DA-5D-R1

DJI O4 Pro build

Freestyle with high-quality onboard recording

The same serviceable 6S platform with DJI's O4 Pro camera and air unit. A separate ELRS receiver keeps the control link independent of the video ecosystem.

Video
DJI O4 Pro
Control
ExpressLRS 2.4 GHz / CRSF
Power
6S / XT60; regulated 9V video rail
BOM
7 exact component lines

Drone Authority reference

DA-5W-R1

Walksnail Moonlight build

Cinematic FPV with a builder-friendly video path

A 6S cinematic build using the Moonlight kit for 4K onboard recording. The control link remains ELRS, while the video path stays inside the Walksnail Avatar ecosystem.

Video
Walksnail Avatar Moonlight
Control
ExpressLRS 2.4 GHz / CRSF
Power
6S / XT60; regulated 9V video rail
BOM
7 exact component lines

Publication gate

What a submitted build must include

01

Identity

Builder name or handle, build name, intended discipline, country, and whether attribution can be public.

02

Hardware

Exact frame, FC/ESC revision, motors and KV, prop, receiver and band, video system, antenna, GPS, battery cell count and connector.

03

Software

Flight stack, target, version, receiver firmware, video firmware, configuration backup, and date captured.

04

Wiring

Clear top and bottom board photos plus a pad-level text map. Remove serial numbers, addresses, and binding phrases.

05

Evidence

Props-off power, receiver failsafe, motor order and direction, video/OSD, hover, temperature, and flight-log notes.

06

Changes

Known substitutions, repairs, tune changes, failures, and anything a second builder must not copy blindly.

Submission begins a review, not automatic publication. We will ask for missing source links and may decline unsafe, unverifiable, promotional, or copied material.

Submit a build record

Notebook standard reviewed 2026-08-23. A published build is documentation, not a warranty, airworthiness approval, or instruction to ignore the manual for the hardware in front of you.